Tagged: emc dumps pdf
- November 8, 2019 at 10:42 am #26292
If you want to consult a preparatory source for your IT exam that offers you passing surety then must downloadIt is a short study guide that ensures your success with excellent grades. You can easily access it by following Realexamdumps.com. You will find there a lot of other services that will boost your performance for final attempt. Expertly guidance for all IT candidates using DEE-1721 questions and answers definitely makes a great help. You will also get exposure to the real exam settings with Online Practice Test. You will repeat your syllabus with this testing engine. In short, you get here a reasonable chance to bright your career by learning under experts. DEE-1721 PDF dumps material is available for download at affordable rates. You should look for free demo version first that will help you decide.
Several servers connected to the Storage Center through FC fabrics using WWN zoning. You recently replaced a server’s FC HBA; however, the server no longer connects to the Storage Center. What is causing this issue?
A. Storage Cento fault domains must be updated with the new HBA WWN
B. Storage Center fault domains must be converted to Virtual Pat Node
C. Server’s zone must be updated with the new switch port to which the HBA is connected
D. Server’s zone must be updated with the new NBA WWN
Demo Question: 2
A storage administrator has multiple servers connected to the Storage Center through two iSCSI networks. You use a software iSCSI Initiator on the servers and the Storage Center runs in Virtual Port Mode. Which IP address is required in the iSCSI Initiator for proper connectivity?
A. Primary IP address for each domain
B. Control Port IP address for each domain
C. Reserve IP address for each domain
D. Management IP address of each controller
Which processes should be used when testing controller failover on a newly installed Storage Center?
A. Start server IO to a volume, restart a controller, then rebalance ports and ensure no IO errors.
B. Start server IO to a volume, restart either controller, and ensure no IO errors are reported.
C. Start server IO to volumes owned on each controller, restart the controllers sequentially, and ensure no IO error.
D. Start server IO to volumes owned on each controller, restart the controllers simutaneously. and ensure no IO error.
- You must be logged in to reply to this topic.